Refurbished Weir Frac Tank (110061)
This fully refurbished 18,000-gallon dual weir open-top frac tank is purpose-built for liquid/liquid separation workflows. Converted from a 21,000-gallon closed-top frac tank, it features a two-stage over-under weir system ideal for produced water separation, pit-free operations, and flowback management. Fully refurbished inside and out, blasted, relined, repainted, and ready to work.
| Effective capacity | 18,000 gallons |
| Tank type | Open-top, dual weir |
| Weir configuration | Two weir walls, over-under setup |
| Cap rail | 2×6 rec tubing |
| Interior surface prep | SP6/SP7 blast + liner |
| Exterior surface prep | SP10 blast + repaint |
| Paint color | Blue |
| Drain valve | 4" front-mounted drain valve |
| Lighting | New LED lights |
| DOT compliance | DOT tape installed |
| Tires | 80%+ tread |
| Rims | Blasted and painted |
| Hydrotesting | Completed twice (post-weld and post-installation) |
Every tank listed in our inventory is ready to ship. We've inspected or repaired the lights, tires, and brakes and ensured the frac tank is ready to ship. Upon order, we post the tank for pickup on a trucking load board to book drivers. Booking a driver can take 1-3 business days and we always get the frac tanks delivered within 7 business days of purchase.
Please note that you as Purchaser are responsible for providing equipment, at delivery, to lift the frac tank(s) off the transport semi-tractor, the tongue weight is approximately 8,000 pounds. As an alternative, you can use wooden blocks to temporarily block up the tank so that the tractor can disengage from the frac tank and drive away; if so, place the blocks under the rails about 15 feet back from the front of the tank where the blocks should be about 30 inches from the rail to the ground.
- In stock, ready to ship
